How To Install
How to Install Your Vinyl Decal
Installing your new Locally Hated decal is quick and easy. Follow the steps below for the best results.
Before You Start
You'll Need
- A clean microfibre cloth
- Masking tape (optional)
- A plastic squeegee or credit card wrapped in a soft cloth
- Patience!
Important: Install your decal in a clean, dry area out of direct sunlight.
Recommended installation temperature:
15°C–30°C
Step 1 – Clean the Surface
Thoroughly clean the area where your decal will be applied.
Remove:
- Dirt
- Dust
- Wax
- Polish
- Grease
- Water spots
The cleaner the surface, the better your decal will stick.
Step 2 – Position the Decal
Hold the decal in place and use masking tape if needed to position it exactly where you want it.
Stand back and check that it is straight before continuing.
Step 3 – Apply the Decal
Peel the backing paper away slowly, leaving the decal attached to the transfer tape.
Carefully place the decal onto the surface.
Using your squeegee or wrapped credit card, firmly press from the centre outwards to remove any air bubbles.
Take your time.
Step 4 – Remove the Transfer Tape
Wait 1–2 minutes.
Slowly peel the clear transfer tape back at a sharp angle.
If any part of the decal lifts, press it back down firmly and wait another minute before trying again.
Step 5 – Final Check
Run the squeegee over the decal once more.
Small bubbles usually disappear naturally within a few days.
After Installation
For the best results:
- Avoid washing your vehicle for 24–48 hours
- Do not pressure wash directly at the edges of the decal
- Avoid using harsh chemicals on the decal
With proper care, your premium outdoor vinyl decal will provide years of great-looking performance.
Common Questions
My decal has small bubbles.
This is normal.
Tiny bubbles often disappear naturally after a few days as the adhesive cures.
Can I reposition my decal?
No.
Once the adhesive makes contact with the surface it cannot be repositioned without damaging the decal.
Will the decal damage my paint?
No.
When applied to factory paint in good condition, quality vinyl decals can be removed without damaging the paint.
Can I install it on tinted windows?
Yes.
Our decals can be applied to glass, including tinted rear windows, provided the tint is fully cured and clean.
How long will my decal last?
Our premium outdoor vinyl is designed to withstand Australia's harsh conditions and, with proper care, can last for many years.
Need Help?
If you have any questions during installation, don't hesitate to contact us. We're happy to help and want to make sure your decal looks perfect.